Web timer for 31 seconds
Start the 31 seconds, set the gauge firmly on the mototaxi tyre valve, and turn to check the next wheel while the reading settles. In a busy Philippine roadside bay or covered parking area, that brief gap lets you prepare the valve cap and cloth without staring at the screen.
Moving around the mototaxi makes several consecutive countdowns useful: one for each tyre, followed by another when a reading seems uncertain. Restarting the same interval keeps the checks consistent while you wipe dust from the fitting, reseat the gauge, or note a result. Heat, traffic noise, and interruptions can make a single long session harder to follow.
Let the actual pressure check determine the interval. A clean valve and a gauge that seals quickly may need less time, while rain, roadside grit, or an awkward wheel position may justify more; if the reading finishes early, use the remaining moment to replace the cap, and if it runs late, complete the check before moving on.
Frequently asked questions
What might make a mototaxi tyre pressure check take longer or shorter than 31 seconds?
A clean, accessible valve can shorten the check. Mud after rain, a hot wheel area, or a gauge that needs reseating can extend it.
What if the mototaxi tyre pressure check finishes before or after 31 seconds?
If it finishes early, secure the valve cap and record the reading. If it takes longer, finish obtaining a stable reading, then restart the countdown for the next tyre.
Cookies policy